becomes stripped, it can be challenging to remove because the tool cannot generate enough torque to turn it. This can happen for various reasons, including:
How to remove a stripped screw?
Removing a stripped screw can be a frustrating task, but there are several s https://rik88.bet/ https://1go88.vip/ methods you can try to extract it. Here are some common techniques to remove a stripped screw:
1. Use a Rubber Band:
- Place a wide rubber band over the stripped screw.
- Press the screwdriver into the screw while applying downward pressure.
- The rubber band should provide extra grip and may allow you to turn the screw.
2. Pliers or Vice Grips:
- Grip the screw head firmly with a pair of pliers or vice grips.
- Turn the screw counterclockwise to remove it.
- Be careful not to apply too much pressure, as this could further damage the screw.
3. Screw Extractor:
- A screw extractor is a specialized tool designed for this purpose.
- Drill a small hole into the center of the stripped screw.
- Insert the screw extractor and turn it counterclockwise to grip the screw.
- Continue turning the extractor to remove the screw.
4. Tap and Die Set:
- If the screw is flush with the surface, you can try using a tap and die set.
- Choose a drill bit that matches the size of the screw hole.
- Drill into the screw until you reach the threads.
- Use the tap from the tap and die set to create new threads in the screw.
- Then, turn the screw counterclockwise to remove it.
5. Hammer and Chisel:
- Carefully use a hammer and chisel to create a new groove in the screw head.
- Once the new groove is deep enough, use a screwdriver to turn the screw counterclockwise.
